Showing 17–32 of 75 resultsSorted by price: low to high
-
- Certificate: UL Listed / FM Approved
- Standard: UL 753 / FM 3132, comply to NFPA 13, 13D, 13R, 72
- Connection: 1/2″ NPT male
- Temperature: -40°C to 60°C
- Operating pres.: 300 / 250 psi
- Enclosure: IP66
- Surface: Corrosion resistant finish
-
- Certificate: UL Listed / FM Approved
- Standard: UL 393 / ASME B40.100 / EN 837-1
- Connection: NPT / BSPT, lower mount (LM) or back connection (BC)
- Temperature: -40°C to 65°C
- W. pressure: Steady, 3/4 of full scale value; Fluctuating, 2/3 of full scale value; Short time, full scale valve
- Surface: Corrosion resistant finish
INQUIRY
-
- Certificate: ISO
- Standard: BS EN 837-1
- Material: SS case, aluminum dial
- Connection: Thread, NPT / BSPT
- Function: Pump suction piping pressure
- Temperature: -40°C to 70°C
- Surface: Bright SS
INQUIRY
-
- Certificate: UL Listed / FM Approved
- Standard: Comply to NFPA 13, 13D, 13R
- Connection: Female thread, or grooved
- K-factor: K5.6, K8.0, K11.2, etc.
- W. pressure: 300 / 175 psi
- Surface: Rough brass
INQUIRY
-
- Certificate: UL Listed / FM Approved, NSF/ANSI 61 Certified
- Standard: UL 258, NSF 61, NSF 372 (Drinking water)
- Connection: Female thread, NPT / BSPT / BSPP (G)
- Temperature: -30°C to 120°C
- W. pressure: 600 / 300 / 175 psi, etc.
- Surface: Rough / chromed plated
INQUIRY
-
- Certificate: NSF 61
- Standard: NSF 61
- Connection: NPT / BSPT
- Adjustment: 25 ~ 100 / 30 ~ 95 psi, etc.
- Temperature: Max 70°C, water
- W. pressure: 400 psi
INQUIRY
-
- Certificate: CE
- Standard: NFPA 20
- Drive: Electrical motor
- Controller: As standard
- Flow: 1~ 154 gpm
- Head: Max 360 psi
- Surface: FBE coating as AWWA C550
INQUIRY
-
-
- Certificate: UL Listed / FM Approved
- Standard: UL 2573, NFPA 20, AWWA C512
- Connection: Threaded, NPT / BSPT / BSPP
- Feature: Small orifice, vent air only
- Temperature: Max 82°C, water
- W. pressure: 300 / 250 / 200 psi
- Surface: FBE coating as AWWA C550
INQUIRY
-
- Certificate: CE
- Standard: EJMA
- Connection: Flanged as ANSI B16.5 Class 150, EN 1092-2 PN16
- Temperature: -10°C to 120°C
- W. pressure: 230 psi
- Surface: Black rubber, with galv. flanges
INQUIRY
-
- Certificate: FM Approved
- Standard: NFPA 20
- Connection: GRV, butt weld, flanged
- Accuracy: ± 2%
- Temperature: 80°C
- W. pressure: 500 psi
INQUIRY
-
- Certificate: ISO
- Standard: EN 12845, NFPA 20 / 22, GB 50974
- Material: SS304, SS316, etc.
- Connection: Flanged as ANSI B16.5 Class 150, EN 1092-1 PN16
- Temperature: 0°C to 120°C, water
- W. pressure: 300 psi
- Effective level: Min 100 mm
- Installation: Up and down, both available
- Surface: Rough SS / red painting
INQUIRY
-
- Certificate: ISO
- Standard: BS EN 14384, EN 1074-6
- Connection: Base flanged as EN 1092-2 PN 16, ASME B16.5 Class 150, etc.
- W. pressure: 16 bar / 20 bar
- Temperature: 4°C to 70°C
- Surface: Red powder coating (RAL 3000)
INQUIRY
-
- Certificate: BSI / LPCB Approved
- Standard: BS 5041-3
- Connection: Flanged to EN 1092-2
- Temperature: 0°C to 38°C
- Test pressure: 30 bar
- Surface: Red powder coating (RAL 3000)
INQUIRY
-
- Certificate: BSI / LPCB / FM Approved
- Standard: BS 5041-1, BS 5154 globe type
- Connection: Flanged to EN 1092-3, ANSI B16.5 Class 150 / 300, or screwed to ISO 7-1
- Temperature: 0°C to 38°C
- Test: Body 22.5 bar / seat 16.5 bar
- Surface: Red powder coating (RAL 3000)
INQUIRY
