Jockey pump
- Certificate: CE
- Standard: NFPA 20
- Drive: Electrical motor
- Controller: As standard
- Flow: 1~ 154 gpm
- Head: Max 360 psi
- Surface: FBE coating as AWWA C550
INQUIRY
Hydrant System
Showing 17–31 of 31 resultsSorted by price: low to high
-
-
Waste cone
- Certificate: ISO
- Standard: NFPA 20
- Connection: Flanged as ANSI 16.42, Class 150 / 300, FF or RF
- Surface: FBE coating as AWWA C550
INQUIRY
-
Air release valve
- Certificate: UL Listed / FM Approved
- Standard: UL 2573, NFPA 20, AWWA C512
- Connection: Threaded, NPT / BSPT / BSPP
- Feature: Small orifice, vent air only
- Temperature: Max 82°C, water
- W. pressure: 300 / 250 / 200 psi
- Surface: FBE coating as AWWA C550
INQUIRY
-
Rubber expansion/Flexible joint
- Certificate: CE
- Standard: EJMA
- Connection: Flanged as ANSI B16.5 Class 150, EN 1092-2 PN16
- Temperature: -10°C to 120°C
- W. pressure: 230 psi
- Surface: Black rubber, with galv. flanges
INQUIRY
-
Fire pump flowmeter
- Certificate: FM Approved
- Standard: NFPA 20
- Connection: GRV, butt weld, flanged
- Accuracy: ± 2%
- Temperature: 80°C
- W. pressure: 500 psi
INQUIRY
-
Foot valve
- Certificate: ISO
- Standard: NFPA 20
- Connection: Threaded as NPT or BSPT, Flanged as EN 1092-2 PN 10 / PN 16
- Temperature: EPDM, 0°C to 80°C
- W. pressure: 16 bar
- Surface: Blue FBE coating
INQUIRY
-
Vortex inhibitor (Anti-vortex plate)
- Certificate: ISO
- Standard: EN 12845, NFPA 20 / 22, GB 50974
- Material: SS304, SS316, etc.
- Connection: Flanged as ANSI B16.5 Class 150, EN 1092-1 PN16
- Temperature: 0°C to 120°C, water
- W. pressure: 300 psi
- Effective level: Min 100 mm
- Installation: Up and down, both available
- Surface: Rough SS / red painting
INQUIRY
-
Pillar fire hydrant
- Certificate: ISO
- Standard: BS EN 14384, EN 1074-6
- Connection: Base flanged as EN 1092-2 PN 16, ASME B16.5 Class 150, etc.
- W. pressure: 16 bar / 20 bar
- Temperature: 4°C to 70°C
- Surface: Red powder coating (RAL 3000)
INQUIRY
-
Breeching inlet
- Certificate: BSI / LPCB Approved
- Standard: BS 5041-3
- Connection: Flanged to EN 1092-2
- Temperature: 0°C to 38°C
- Test pressure: 30 bar
- Surface: Red powder coating (RAL 3000)
INQUIRY
-
Landing valve
- Certificate: BSI / LPCB / FM Approved
- Standard: BS 5041-1, BS 5154 globe type
- Connection: Flanged to EN 1092-3, ANSI B16.5 Class 150 / 300, or screwed to ISO 7-1
- Temperature: 0°C to 38°C
- Test: Body 22.5 bar / seat 16.5 bar
- Surface: Red powder coating (RAL 3000)
INQUIRY
-
Fire Hose Pipe
- ertificate: UL Listed / BSI approved
- Standard: UL 19, BS 6391, DIN 14811, NF S 61-112, JIS B 9911
- Feature: Type 3, rubber covering, resistant to weather, UV, and most chemicals
- Color: Red, yellow, blue, etc.
- Temperature: -20°C to 80°C
INQUIRY
-
Fire Hose Nozzle
- Certificate: LPCB Approved
- Standard: EN 15182-3
- Spray angle: 15° ~ 27°
- Throw at 6 bar: 30m at full jet, 15m at spray jet
- Flow at 6 bar: 230LPM at full jet, 220LPM at full cone
- Hydraulic test: 22.5 bar
- Surface: Black or red plastic
INQUIRY
-
Fire Hose Reel
- Certificate: LPCB Approved
- Standard: BS EN 671-1
- W. pressure: 12 bar
- Test / burst: 18 bar / 30 bar
- Hose color: Red or black
- Surface: Red powder coating (RAL 3000)
INQUIRY
-
Fire Hose Cabinet
- Standard: BS 5041, UL 47, NFPA 14
- Capacity: Hose rack assembly + landing valve
- Mounting: Wall surface / recessed
- Surface: Red powder coating / bright SS
-
Manual operated lever control fire monitor
- Certificate: FM Approved
- Standard: NFPA 1964, GB 19156
- Connection: Flanged as ANSI Class 150, EN 1092 PN16, etc.
- Feature: Lever control, straight jet, wide spray
- Rotation: 360° horizontal
- Elevation: 90° above + 60° below, etc.
- W. pressure: 200 psi
- Surface: Red FBE coating, etc.
INQUIRY
